gauge length

美 [ɡeɪdʒ leŋθ]英 [ɡeɪdʒ leŋθ]
  • 标距(长度);计量长度
gauge lengthgauge length
  1. Analysis of the relationship between the volume of roller pressure and the gauge length of stretch-breaking

    苎麻牵切隔距与皮辊加压的关系分析

  2. Weibull distribution under different gauge length of CVD-SiC filament with a tungsten core

    线纹长短不等,且沿轨长度方向呈现断续分布。不同标距下CVD钨芯SiC纤维强度的Weibull分布

  3. DETERMINATION OF THE FINAL GAUGE LENGTH WITH WEIGHT METHOD The Analysis and Calculation of The Distance Between The Sensors in Measuring Velocity

    断后标距的重量法测定测速靶距分析与计算

  4. The influence of resistance strain gauge length in strain-ring on measuring sensitivity is analysed as well .

    同时分析了应变环中电阻应变计长度对测试灵敏度的影响。

  5. DETERMINATION OF THE FINAL GAUGE LENGTH WITH WEIGHT METHOD The Determination of the Batting Pionts and Distances

    断后标距的重量法测定

  6. There is a fixed relationship between the gauge length and the cross-sectional area of the test-piece at the reduced diameter .

    定向低频分析与测距浮标标距长度和试样在直径减少处的横截面面积之间有固定的关系。

  7. Strength of CVD & SiC fiber at room temperature follows Weibull statistics , Weibull shape parameter decreases with rising of gauge length of test sample .

    室温下CVD&SiC纤维的强度分布服从Weibull分布,Weibull模数随拉伸试样标距的增大而减小。

  8. According to the assumption that differential total strain on a gauge length is the sum of differential elastic and plastic strains , analytical solution of complete stress-strain curve is derived .

    根据总应变的微分等于弹性及塑性应变的微分之和这一假设,在峰后线性应变软化本构关系的情形下,得到全程应力–应变曲线的解析解。

  9. The authors designed a kind of improved control system based on the theoretical relation among the initial gauge length of sample , travel rate of testing machine transom , time and sample 's real constant-strain rate .

    根据试样初始标距长度、试验机横梁移动速度、试样真实恒应变速率和时间的理论关系式,设计了改进的控制系统。

  10. A correct configuration of extensometer in electronic universal testing machine is discussed as regards of extensometer structure , gauge length and measuring range , nominal measuring scale , output sensibility , absolute error of indicated value as well as strain error in the paper .

    从引伸计的结构、标距和测量范围、标称量程与输出灵敏度、示值的绝对误差和应变误差等几个方面论述电子万能试验机引伸计的正确配置。

  11. However , differential plastic strain on a gauge length depends on specimen length , softening modulus , differential axial stress , and thickness of tensile localized band . The thickness is determined by gradient-dependent plasticity where a characteristic length is included in yield function .

    塑性应变的微分与应力的微分、试样高度、软化模量及局部化带的厚度有关,局部化带的厚度由梯度塑性理论确定。

  12. The optimization of tension Hopkinson bar ( TSHB ) tests has been studied . The structure and loading conditions of TSHB have evident influence on test results including the gauge length and geometry of specimen , interconnecting linkage , contact boundary , stress waves and so on .

    研究了拉伸Hopkinson试验(TSHB)的优化问题:Hopkinson拉伸试验装置的结构及加载条件明显影响试验结果,其中包括试件的几何形状、试件与杆的连接以及接触边界、应力波的影响。

  13. Accurate Measurement of Gauge Block Length Using Phase-stepping Interferometry

    用相位偏移干涉法精确测量量块长度

  14. Proceeding from the relationship between the top beam length of hydraulic support and limit collapse gauge the length of immediate roof , carried out an analysis of the top beam length , pillar location of hydraulic support and roof applicability .

    从液压支架的顶梁长度与直接顶的自承极限垮距长度之间的关系出发,对液压支架的顶梁长度、支柱位置与顶板的适应性进行了分析。

  15. Willis bite gauge equivalent focal length

    威利斯垂直距离测量尺当量焦距,等效焦距

  16. Study on the Measuring & Analysis of Plate Leveling for Heavy Gauge Cut to Length Line and Its Processing Simulation ; Effect of Horizontal Roll Straightening on Cross Section Dimensions of Heavy Rail

    厚板横切机组辊式冷矫直机测试分析与矫直过程模拟研究辊式水平矫直对重轨断面尺寸的影响分析

  17. Multifunction Downhole Tubing Length Measurement Gauge Intelligent Photoelectric Tubing Length Measurer

    多功能井下管柱丈量仪光电式油管长度智能计量仪

  18. The results prove that the feed plate gauge remarkably affects fiber length distribution of card sliver .

    结果证实,给棉板与刺辊间隔距大小对生条中的纤维长度分布有重要的影响。

  19. As a length standard material , gauge block transfers the length unit to almost every step in the manufacture and plays an important role in the product quality assurance program . The measurement and verification of the high grade gauge block is mainly carried out by interferometry .

    量块是重要的长度实物标准,它将长度单位传递到工业生产的各个环节,在产品质量保证体系中发挥着重大作用,高等级量块的测量与检定多借助于干涉法进行。

  20. In the measurement process of the gauge block , higher than the second grade and K level gauge length must be measured with the interference absolute method .

    量块检测过程中,高于二等和K级的量块工作长度就必须借助绝对测量。利用条纹法、二维FFT法和莫尔条纹法可以准确得到干涉条纹小数部分。